Hundt RS 6 row punching machine (foot-operated)
Article number:
182010
Foot-operated inline punching press for pipe insulation. When designing this machine, the emphasis was placed on a simple, robust construction and good transportability (thanks to its low weight). The punching units are bolted to the machine carrier; it is not possible to add or adjust the distances between the punching units at a later date.
Normal accessories
6 punching units with Ø 3.3 mm holes (Ø 2.0 - 6.0 mm possible on request), drip tray for punching waste
Special accessories
Additional punching units (only available as original equipment) that cut holes from Ø 2.0 to 6.0 mm
| Technical data | RS 6/1000 |
|---|---|
| Technical data:Working width | RS 6/1000:1020 mm |
| Technical data:Max. Plate thickness (steel 400 N/mm²) | RS 6/1000:1,25 mm |
| Technical data:Distance between the holes | RS 6/1000:symmetrical |
| Technical data:Dimensions of the packaging approx. | RS 6/1000:130 x 80 x 130 cm |
Subject to design changes without prior notice
