Swivel bending machine KS 200 (manually operated)
- Mechanical, hand-operated machine in solid design
- Lower and bending beam made of steel construction
- All bearings and guides are maintenance-free
Upper cheek:
- Made from rolled profiles
- Closed with foot lever or with two operating levers attached to the left and right of the machine (also weight compensation)
- Clamping pressure adjustable on both sides
- Maximum opening width: approx. 100 mm
Bending clamp:
- Scale 0-180° for reading the bending angle
- Adjustable bending angle limiter
- Equipped with roller bearings
- Adjustable weight compensation using telescopic spring balancer for working with minimum effort
- All bending rails are interchangeable, if bending beam can be lowered and adjusted to different sheet thicknesses and radii
Normal accessories
20° focus rail, radius = 1 mm for the upper beam, 1 insert rail each 68/10 and 68/24 for bending beam
| Technical data | KS 200 |
|---|---|
| Technical data:Useful length | KS 200:2040 mm |
| Technical data:Working capacity (steel 400 N/mm²) | KS 200:1.00 mm |
| Technical data:Working capacity (aluminum 250 N/mm²) | KS 200:1,50 mm |
| Technical data:Working capacity (VA 600 N/mm²) | KS 200:0.60 mm |
| Technical data:Working power (copper 300 N/mm²) | KS 200:1,25 mm |
| Technical data:Working capacity (zinc 150 N/mm²) | KS 200:2,50 mm |
| Technical data:Packing dimensions approx. | KS 200:2630 x 610 x 1155 mm |
| Technical data:Weight | KS 200:700 kg |
Subject to design changes.
