Swivel bending machine KS 200 (manually operated)
- Mechanical, hand operated machine in massive design
- Lower and bending beam made of steel construction
- All bearings and guides are maintenance-free
Upper cheek:
- From rolled sections
- Closed with foot lever or with two control levers mounted on the left and right side of the machine (at the same time weight balancing)
- Clamping pressure adjustable on both sides
- Maximum opening width: approx. 100 mm
Bending beam:
- Scale 0-180° for reading the bending angle
- Adjustable bending angle limit
- Equipped with rolling bearings
- Adjustable weight compensation by means of telescopic spring balancer for work with minimum effort
- All bending rails interchangeable, if bending beam can be lowered and adjusted to different sheet thicknesses and radii
Normal accessories
Focusing rail 20°, radius = 1 mm for the upper beam, 1 insertion rail each 68/10 and 68/24 for bending beam
| Technical data | KS 200 |
|---|---|
| Technical data:Useful length | KS 200:2040 mm |
| Technical data:Working capacity (steel 400 N/mm²) | KS 200:1.00 mm |
| Technical data:Working capacity (aluminum 250 N/mm²) | KS 200:1,50 mm |
| Technical data:Working capacity (VA 600 N/mm²) | KS 200:0.60 mm |
| Technical data:Working power (copper 300 N/mm²) | KS 200:1,25 mm |
| Technical data:Working capacity (zinc 150 N/mm²) | KS 200:2,50 mm |
| Technical data:Packing dimensions approx. | KS 200:2630 x 610 x 1155 mm |
| Technical data:Weight | KS 200:700 kg |
Design subject to change without notice.
