Hundt RDE 5 row punching machine (motorized)
Article number:
RDE 5/1000-10:
185510
RDE 5/1000-15:
185515
Row punching machine with electric drive for punching insulating pipe blanks with rear ventilation.
The punching process takes place via a geared motor that drives the eccentric shaft directly. An optimized electrical control system always ensures the correct direction of rotation. This eliminates the need to swap the phases when changing electrical plugs and sockets. The punching process is triggered by pressing the foot switch.
Normal accessories
Version with 5 hole cuts, 2 support brackets front 500 mm, right with angle stop, extendable sheet support front, 2 support brackets rear, adjustable length stop
Special accessories
Collared holes on request at no extra charge
| Technical data | RDE 5/1000-10 | RDE 5/1000-15 |
|---|---|---|
| Technical data:Working width | RDE 5/1000-10:1020 mm | RDE 5/1000-15:1020 mm |
| Technical data:Max. Sheet thickness (steel 400 N/mm²) | RDE 5/1000-10:1,25 mm | RDE 5/1000-15:1,25 mm |
| Technical data:Max. Hole diameter | RDE 5/1000-10:10 mm | RDE 5/1000-15:15 mm |
| Technical data:Supply voltage | RDE 5/1000-10:400 V (3LPNE) | RDE 5/1000-15:400 V (3LPNE) |
| Technical data:Drive power | RDE 5/1000-10:1,5 kW | RDE 5/1000-15:1,5 kW |
| Technical data:Weight approx. | RDE 5/1000-10:180 kg | RDE 5/1000-15:230 kg |
| Technical data:Packing dimensions approx. | RDE 5/1000-10:135 x 80 x 115 cm | RDE 5/1000-15:135 x 80 x 115 cm |
Subject to design changes
