Schechtl swivel bending machine MBM (motorized)
Article number:
The MBM ECT is your convenient powerhouse for consistently precise bending sequences and high efficiency. The machine is suitable for thin sheet processing for small series and recurring single production. The 1-man operation and monitor control make production conveniently simple.
ECT control
Electronically controlled profile production reduces setup times; input of bending angle, depth stop dimension, lift height, cover and blank; 250 profile sets and 36 bending angles can be stored per profile set
Technology
Easy to operate manual bending beam lowering, adjustable preload for maximum bending accuracy, large freedom in the upper beam, manual crowning of the bending beam, control cabinet space-saving under the depth stop, wear-free and maintenance-free direct drive via eccentric (no gears, no chains), soft start of bending beam and depth stop
ATTENTION!
This machine is qualified for use in industrial environment according to EN 61800-3 category C3.2 CE. It is not intended for use in a public low-voltage network that also feeds residential areas. When used in these networks, high-frequency interference is to be expected, which requires additional interference suppression measures!
Normal accessories
Focusing rail 20°, radius = 1.0 mm (cranked) for the upper beam (66/24 mm), 1 insert rail each 68/10 mm and 68/24 mm for bending beam, motor-driven depth stop 6-750 mm, foot switch, connection plug 16 A 5 m cable, supply voltage: 3 x 400 volts, 50 Hz
Special accessories
Roller shear*, cone finger for motor depth stop, 2nd foot switch for 2-man operation, goad foot rail 55 and 32 mm with pick-up rail, split bending beam*, brush or ball roller support, depth stop*.
* only available for original equipment
| Technical data | MBM 250 | MBM 310 |
|---|---|---|
| Technical data:Useful length | MBM 250:2540 mm | MBM 310:3100 mm |
| Technical data:Max. Sheet thickness (steel 400 N/mm²) | MBM 250:1.00 mm | MBM 310:1.00 mm |
| Technical data:Max. Sheet thickness (aluminum 250 N/mm²) | MBM 250:1,50 mm | MBM 310:1,50 mm |
| Technical data:Max. Sheet thickness (VA 600 N/mm²) | MBM 250:0.80 mm | MBM 310:0.80 mm |
| Technical data:Nominal power bending/upper beam | MBM 250:0.55/0.22/0.4 kW | MBM 310:0.55/0.22/0.4 kW |
| Technical data:Max. Opening height | MBM 250:130 mm | MBM 310:130 mm |
| Technical data:Table height | MBM 250:900 mm | MBM 310:900 mm |
| Technical data:Weight | MBM 250:1600 kg | MBM 310:1800 kg |
| Technical data:Max. External dimensions (L x D x H) | MBM 250:3302 x 1579 x 1747 mm | MBM 310:3862 x 1579 x 1747 mm |
