Schechtl TBX folding machine (manual)
Article number:
Easy to set up and transport by just one person.
The TBX model is particularly small and handy. Due to its low weight, it can be carried comfortably by one person and supports the sheet metal professional as a helpful tool on site on the roof or construction site. But it is also an inexpensive tool for hobbyists and DIY enthusiasts for perfect bending and cutting (see roll shears) of sheet metal. It can be easily attached to any workbench or board with the mounting plates on both sides. We also supply a suitable base frame as an option.
The TBX consists of a welded steel construction. The roller bearings are wear and maintenance-free. The working plate is guided between the upper and lower beam and an operating lever on the right-hand side of the machine clamps the working plate. The clamping pressure of the upper beam can be adjusted on both sides with a clamping screw.
Normal accessories
Top rail 45°, radius 1 mm (not interchangeable)
Special accessories
X-frame base (foldable, with castors, approx. 17 kg), roller scissors, beading device
| Technical data | TBX 100 |
|---|---|
| Technical data:Useful length | TBX 100:1000 mm |
| Technical data:Max. Sheet thickness (steel 400 N/mm²) | TBX 100:0.80 mm |
| Technical data:Max. Sheet thickness (aluminum 250 N/mm²) | TBX 100:1.00 mm |
| Technical data:Max. Sheet thickness (VA 600 N/mm²) | TBX 100:0,50 mm |
| Technical data:Opening height upper beam | TBX 100:45 mm |
| Technical data:Weight (with/without X-frame) | TBX 100:55/38 kg |
| Technical data:Max. External dimensions (L x D x H) | TBX 100:1240 x 700 x 1150 mm |
